Passive Multi-Port Distributor 8x Interconnected jacks, Sockets are divided into 2x quadruple groups- but can also be modified to an eight-multiple (soldering bridge on the circuit board), Width: 2HP
Precision Adder / Buffer 4 CV inputs (1x with controller, 3x without controllers), Width: 6 TE / HP, Depth: 50 mm, Power requirement: +10 mA (+12 V) / -10 mA (-12 V)
Case for Modules A number with 84 HP for installation of modules, Incl. external power supply (1200 mA) and bus board, Dimensions (W x H x D): approx. 445 x 150 x 160 mm
USB to Clock / Start / Stop Interface Synchronization of clock-controlled modules via MIDI and USB, MIDI input, USB input for MIDI via USB, Clock outputs, Wait button / control input, LED indicators for Clock, "1" and...'
Wasp Filter Special edition, Special 12 dB multimode filter, Circuit technology of the "EDP Wasp", Black front, Yellow pot caps, Width: 8 HP, Depth: 45 mm, Power requirements: +30 mA (+12 V)/-10 mA (-12 V)'
Six Stage Opto FET VCF New filter module in which so-called opto FETs are used to control the filter frequency, Dimensions (W x D): 40.3 mm (8 HP) x 65 mm, Power requirement: 40 mA
Power Adapter 12 V / 2000 mA, -12 V / 1200 mA, 5 V / 4000 mA, 100-230 V ATTENTION - the connection and installation of parts which carry mains voltage (mains input, power supply, connecting cable, etc.) must only be...
Case for A-100 module 9U with three module rows, External dimensions (W x H x D): Approx. 445 x 420 x 160 mm, Internal dimensions (W x H x D): 3 x 84 HP x 3 U, Usable depth for A-100 modules: About 80 mm in the area of...
Analogue Modular System - Portable Suitcase Version Basic system with PSU3 power supply (12V / 2000mA, 12V / 1200mA 100 - 230 V), Installed modules and bus boards, Overall dimensions (W x H x D - with lid and rubber...
Original Doepfer case Untreated (no paint and/or lacquer) body constructed from "raw" wood, External dimensions: approx. 445 x 275 x 160 mm, Interior dimensions: approx. 2x 84 HP x 3 U, Usable depth for A-100 modules:...'
Case with base frame Two rows with 84 HP each for installing modules, 2x 3 H3, Dimensions: approx. 465 x 330 x 170 mm, Usable depth for A-100 modules: approx. 70 mm in the power supply area (lower right), otherwise...
Base frame in the case Three rows with 84 HP each for the installation of modules, 3x 3 H3, Usable depth for A-100 modules: approx. 70 mm in the power supply area (lower right), otherwise approx. 100 mm, Dimensions (W...
Low cost base With PSU3 power supply (+ 12V / 2000 mA, -12V / 1200 mA, +5V / 4000 mA, 100 - 230 V), Two module rows, 2x 3 U / 84 HP, Ideal as a base for the A-100LC6 / LC9 or as stand-alone housing, External...
Substructure housing for modules 2x 84 HP, With PSU3 power supply: +12 V / 2000 mA, -12 V / 1200 mA, +5 V / 4000 mA, 100 - 230 V, Removable lid with carrying handle, Steel ball corners, Max. depth for modules in the...
Bus Board Compatible with the Roland AIRA series (requires PSU3 power supply), Bus board (1x), Incl. 4 connection cables with flat connectors, approx. 30 cm in length
USB/ MIDI-CV/ Gate Interface Vintage edition with black front plate, Allows the integration of the A-100 module system into a USB or MIDI system, 4 Analogue CVs, Gate signal, Width: 6 HP, Depth: 55 mm, Power...
24 dB Low Pass 1 (VCF1)Module A-120 is a voltage-controlled 24 dB low-pass filter, which filters out the high frequency components from a sound spectrum while allowing the low frequencies to pass unhindered. The cut-off...
Dual linear/exponential VCA The character of the control scale can be switched to linear or exponential, Can be used to process both audio and control voltages, Black front panel, Width: 8 HP, Depth: 50 mm, Power...
Mixer Module Mixers with logarithmic potentiometers, Primarily for mixing audio signals, Vintage edition with black front panel, Width: 8 HP, Depth: 35 mm, Current consumption: +10mA (+12V) / -10mA (-12V)